STRUCTURE FIRE                                                                                                                                               SOG 3.8

ENGINE IS FIRST ON THE SCENE AND HYDRANT WAS MADE (FORWARD LAY)

Sergeant/Driver Operator:

1. position apparatus
2. set up pump to use tank water
3. charge preconnect(s) or deck gun using tank water
4. connect 5" supply line to intake
5. signal plug operator to open hydrant
6. don turn out gear as required by the situation, and place SCBA in accessible location
7. change out SCBA bottles as needed
8. provide and keep track of all equipment off engine
Firefighter:
1. pull 5" line to hydrant and make connection
2. open hydrant on signal from driver/operator
3. straighten out 5" line (assure there are no kinks)
4. report to driver/operator
5. bring in additional equipment
6. be prepared to back-up attack line
Company Commander:
1. establish Command
2. make size-up and develop attack plan
3. direct other incoming units and implement plan until relieved of command
4. pull 1 3/4" or 2 1/2" preconnected attack line
5. operate the nozzle (exterior operation only until back-up is available)
6. be prepared to set ladder for rescue


When operating as a four person company the firefighter is responsible for the duites deemed necessary by the company commander.